General discussion • RPi5B 64 bit Pi-OS - how to disable window snapping?
I am trying to adjust the windows in my software development tool like I have been for ages on earlier versions of RPi operating systems.But now on an RPi5B with64 bit bookworm set to use X11 I have...
View ArticleTroubleshooting • Re: RPi 5 mouse pointer/cursor constantly blinking
Hi,I found the same issue with the Cinnamon desktop, I set a card up on the Pi4 and it was working OK move it over to the Pi5 and I got the blinking, sometimes distorted cursor.Found a few similar...
View ArticleSDK • Re: Raspberry Pi based Pico development using Visual Code setup fails
Also, quick question, how are you powering up your Pico? From a USB C cable and wall adapter attached to the regular USB-C port on the Pico, or directly from the RPi 5 (and diode), or battery? It...
View ArticleGeneral discussion • Re: Bookworm feedback thread
I could run remote sessions with X by setting the DISPLAY environment variable. Does Wayland support something like this?Do you want to display a remote X client in a local Wayland session or a remote...
View ArticleMicroPython • Re: Running an instance of M-Python on each core
Thanks trejan,I'm running 1.21.0 BUT,I've found a bug in my code that almost certainly caused the PWM issue (sharing a pin! - I'm surprised it worked at all)Statistics: Posted by BillTodd — Tue Dec...
View ArticleRaspberry Pi OS • Re: Pi OS 5.1 not working
Flashing using the new tool (pretty slick). For other versions, you can simply drag the archive file to the tool, and it will set it up from there (which is how I'm flashing). Used to use Balana, but...
View ArticleGeneral discussion • Re: Raspberry Pi 5 discussion thread
I just gave it a spin. Works perfectly. By the way, this is my second unit and again, the usb hubs are so tight. Plugging in and out stuff is almost "scary". RPI4 wasn't like that. What has changed?i...
View ArticleDeutsch • hitze problem mit dem raspberry pi zero w
Ich habe mir ein Raspberry pi geholt um wir was zusammen zu bauen und habe mir dazu eine IR Kamera geholt. Mein Projekt funktioniert jedoch wird die Kamera Platine richtig Heiß. Weiß jemand warum kann...
View ArticleClik here to view.
Raspberry Pi OS • Re: RasPi-5/4 GB - poor timekeeping performance after OS...
after a few steps, it went back in line as i predicted, and the offset stabalized(ignore the glitch on the right, i rebooted)seems i'm not able to reproduce your issuesStatistics: Posted by cleverca22...
View ArticleGeneral discussion • Re: A Pi Pie Chart
I did run pichart on Pi5 without overclocking and 64bit Bookworm.57.8 is not much less than the 58.3 reported for "Pi5 Quad A76", which was achieved with 32bit OS I...
View ArticleGeneral • External reset
I read"The chip can also be reset by taking its RUN pin low. Taking RUN low will hold the chip in reset irrespective of the state of the core power supply (DVDD) and the power-on reset / brown-out...
View ArticleOther projects • The CaribouLite SDR is a HAT add on for The PI
The CaribouLite SDR is a HAT add on for The PI. I make some informative videos -HackRF One vs. CaribouLite at FRS Frequencies.https://youtu.be/fzVpYNdPsi8CaribouLite SDR - Demo of CubicSDR 0.2.7 vs....
View ArticleGeneral discussion • Re: Raspberry Pi5 Benchmarks Thread
I have read that 3000MHz is maximal, and that 4GB Pi5 is faster than 8GB Pi5.It seems I was really lucky in chip lottery, 8GB was sold out so I got 4GB Pi5.And no problems running with 3000MHz for all...
View ArticleClik here to view.
Troubleshooting • Re: Yet another user struggling with VNC...
I have no doubt that this is working fine for many people. Unfortunately, something I'm doing is different, making it NOT work for me. I searched for "300 200" and I found this post:...
View ArticleClik here to view.
Interfacing (DSI, CSI, I2C, etc.) • MIPI DSI panel with CM4 and ILI9881c
Hello all,We are attempting to connect a 7" 800X1280 MIPI DSI display panel to a CM4 mounted on a custom carrier board. The panel uses the ili9881c IC. We used the mainline panel-ili9881c driver and...
View ArticleGeneral discussion • Re: Is there a (simple) way to clone a mostly empty SD...
There is no support given for pishrink but give it a try.Statistics: Posted by framp — Wed Dec 13, 2023 9:25 pm
View ArticleOther RP2040 boards • Re: Custom RPI Pico (Need someone too look over)
The bypass cap on the MMA8451QR1 isn't correct. You've put it on pin 13 which is NC but it should be on pin 2 BYP.I wouldn't leave MMA8451QR1 SA0 floating. The datasheet doesn't say if it is safe to...
View ArticleRaspberry Pi OS • Re: Bookworm update: generating a heap of /boot/initrd.img....
When you remove unused kernels the names of the current unused kernels are saved in /boot/deletedKernels.txt. That way the script can install the deleted kernels again if requested. There is no way to...
View ArticleAdvanced users • Re: Is the overlay filesystem required to prevent corruption...
Check this doc out for more ideas.https://pip.raspberrypi.com/categories/ ... system.pdfVery interesting, thanks. What I take from that is I can't have it off if I want to be certain it won't risk...
View ArticleOff topic discussion • installing RPi.GPIO and vs code issues
Hi! I am new to Raspbian OS and not very familiar with the software. So far, I have done basic booting stuff and also installed vs code in the Pi. I have manage to successfully connect to the Pi via...
View Article