Advanced users • Re: [SOLVED] Power Monitoring / System Health Monitoring on...
I am curious is there any software that can just dump all the current system health information for my raspberry pi 5? Temperatures? Power consumption? Voltage at USB port? Any other diagnostic data?...
View ArticleTroubleshooting • Re: Pi5 - Won't complete a boot - Power button problem?
Have you been through this?viewtopic.php?t=58151Statistics: Posted by kip_the_elder — Thu Jul 04, 2024 8:56 am
View ArticleBare metal, Assembly language • Re: Pi5 Boot Process
I wrote this part of the tutorial just yesterday. I tested exactly this because I thought exactly the same thing. However, the Raspberry Pi 5 with "only" bcm2712-rpi-5-b.dtb, bootcode.bin and...
View ArticleCamera board • Re: Camera Module 3 Wide - Cannot allocate memory
Hello, thank you for your reply. I tried the cma-384 but the Pi was unable to boot. There was just a black screen. So I returned it back to cma-256.I also tried to reinstall the latest...
View ArticleGraphics programming • Re: Dispmanx is deprecated, but is it planned to be...
When they first appeared I checked all the posters posts with ZeroGPT and they were all human written, but the posts have been locked to prevent editing, just in case....Statistics: Posted by jamesh —...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: SN65DSI84 based solution non-working...
What kernel version, video mode timings, DSI flags, number of lanes etc. are (or were) you using?It was nearly working so I expect it can be fixed!Statistics: Posted by njh — Fri Jul 05, 2024 8:58 am
View ArticleTroubleshooting • Re: Freezing under load with Raspberry Pi 4B 1gb, me or the...
Just some thoughts. The Zero2W should fail with the same problem, but earlier because it has half the RAM again, doing the same tests. Our Pi3s now lock up to with any sort of heavy use. It sounds...
View ArticleClik here to view.
Other RP2040 boards • Re: Own board - messed USB!
Thank you arg001 - this is really informative. I've hacked the power issue. Guess I'll just lay it out again but better informed.Statistics: Posted by stevemuio — Fri Jul 05, 2024 9:28 am
View ArticleInterfacing (DSI, CSI, I2C, etc.) • CM4 UART issues when migrated from...
Hi,I used CM4 UART (GPIO4 = TXD3, GPIO5 = RXD3) with Bullseye. It worked well. Now migrated my image to Bookworm and can read/write to/from that UART.I see all UARTs activated: with Bullseye I used...
View ArticleOff topic discussion • Re: Why did Dride Dashcams fail?
Dride took on an ambitious project but struggled with the technical challenges of implementing a complete dual-camera system on the Raspberry Pi. Using the CSI port for the front cam was a good start,...
View ArticleBeginners • Re: Unable to flash and use PICO on Mac
Tried with a Windows based laptop, same results. No port !Statistics: Posted by Rob66 — Fri Jul 05, 2024 9:38 am
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: CM4 UART issues when migrated from...
Did you mean that you can't access that UART? Give concrete examples - how are you trying, what are the errors, etc.Note that with newer kernels, UART3 should end up on ttyAMA3 - the mapping is...
View ArticleGeneral discussion • Re: Flash the eMMC
The purpose of asking this question is for mass production. Burning one CM4 for 30 minutes is not mass-produced, it is unacceptable to only produce 16 units in a day.Statistics: Posted by zoro86227 —...
View ArticleAdvanced users • Re: I need help with the ip route on my server - RPi4
I am running raspberry pi os bullseyeStatistics: Posted by mas6y6 — Sat Jul 06, 2024 7:19 am
View ArticleAdvanced users • Re: How do I make my rpi boot faster?
@MiscBits suggested above to try systemd-analyze What did that show?On my Pi5 (full desktop) I did:Code: $ systemd-analyze blame | head -102.645s exim4.service1.394s dev-nvme0n1p2.device1.377s...
View ArticleRaspberry Pi OS • Re: Problem Installing Bookworm Desktop RPI1 B+
bullseye is working successfully now i installed it...(im not sure if bullseye support python 3.12) the only problem is with the bookworm..Whatever the problem with installing RasPiOS Bookworm, it...
View ArticleAdvanced users • Re: Display Priority on Raspberry Pi 5 Pi OS
Yes, the methods you linked to are not applicable to KMS. You need to find alternative techniques that do a similar thing. I was just hintimg at things you need to look at.First find a way to detect...
View ArticleRaspberry Pi Connect • Re: WISH LIST
Dual monitor sounds a reasonable idea, I assume you mean via a extra button to detach and attach to the other screens feed. Though an option for both streams at once would be good, especially for...
View ArticleGeneral discussion • Re: How does Raspberry PI 5 Power
Do not try to power your servos and/or motors from the Pi! That will not be possible!What is your servo supply voltage?What is your DC motor supply voltage?What is the current required by each of them...
View ArticleOff topic discussion • Which connector is required to connect a hard drive
HiI found an old Raspberry pi. I am thinking to use it by increasing it's Storage but I am not sure how can I connect my hard drive with Raspberry pi can someone please guide me.Statistics: Posted by...
View Article