hi,
after some search, I found the datasheet of the sensor - https://wiki.dfrobot.com/_A02YYUW_Water ... KU_SEN0311
In previous answer, you have mentioned that we should not connect any sensor which requires more than 5V -> this what you explained?
I have one doubt, I can connect the 3.3V from pico pin 36 to sensor right?, is that 36 pin in pico supports 3.3V or it is only supports 3V
after some search, I found the datasheet of the sensor - https://wiki.dfrobot.com/_A02YYUW_Water ... KU_SEN0311
In previous answer, you have mentioned that we should not connect any sensor which requires more than 5V -> this what you explained?
I have one doubt, I can connect the 3.3V from pico pin 36 to sensor right?, is that 36 pin in pico supports 3.3V or it is only supports 3V
Statistics: Posted by vishakraj25 — Sat Mar 02, 2024 12:56 pm
