Hi Guys,
I just got a Compute module 4 linked here: https://www.pishop.us/product/raspberry ... cm4004008/
I flashed the EMMC and when I boot up the CM4 and run the command "df -h", 75% of my "/dev/mmcblk0p2" memory is used up as seen in the photo attached below. I was wondering if this was normal because this is preventing me from running any commands (like compiling kernel) because I get the error "memory is all used up" later on. How do I free up some memory; I read online that installing the OS system onto the microsd card and then pluging it into the IO board is not an option. I have a microSD card, can I use this as extra storage for the CM4? If I can, how do I do that/ make the cm4 use the microSD memory.
Thanks!
I just got a Compute module 4 linked here: https://www.pishop.us/product/raspberry ... cm4004008/
I flashed the EMMC and when I boot up the CM4 and run the command "df -h", 75% of my "/dev/mmcblk0p2" memory is used up as seen in the photo attached below. I was wondering if this was normal because this is preventing me from running any commands (like compiling kernel) because I get the error "memory is all used up" later on. How do I free up some memory; I read online that installing the OS system onto the microsd card and then pluging it into the IO board is not an option. I have a microSD card, can I use this as extra storage for the CM4? If I can, how do I do that/ make the cm4 use the microSD memory.
Thanks!
Statistics: Posted by help_bio — Fri Aug 30, 2024 10:11 pm