Hi,
After some testing of different sound boards, I managed to get the official DAC PRO to run as exptected, in a bare metal MiniDexed project. Compared to the previously owned RASPIAUDIO Audio DAC Hat, it also functions well, sending signals thru the chain. So far so good.
Now I want to connect external 1/4" (6,3mm) jacks in a case, as well an external 1/4" stereo headphone jack, and last but not least an encoder for physical volume adjustments.
The encoder is described in the manual, so I will try accordingly, as soon as it arrived home. However, in the manual and in the official Raspberry online documentation https://www.raspberrypi.com/documentati ... audio.html there is no detailed description of how/where to connect such wiring?
The documentation refers to "J1" and "J6" but I cannot quite understand how it should be wired?
Also, from my understandring, the J1 doubles the internal RCA jacks (?!) and the J7/J9 features a separate set of balanced outputs, right?
Last, but not least, the "Detection" function, mentioned in both J6 and J1, how does it work and how is it wired to the physical connectors?
Kindest regards, RicoTico
After some testing of different sound boards, I managed to get the official DAC PRO to run as exptected, in a bare metal MiniDexed project. Compared to the previously owned RASPIAUDIO Audio DAC Hat, it also functions well, sending signals thru the chain. So far so good.
Now I want to connect external 1/4" (6,3mm) jacks in a case, as well an external 1/4" stereo headphone jack, and last but not least an encoder for physical volume adjustments.
The encoder is described in the manual, so I will try accordingly, as soon as it arrived home. However, in the manual and in the official Raspberry online documentation https://www.raspberrypi.com/documentati ... audio.html there is no detailed description of how/where to connect such wiring?
The documentation refers to "J1" and "J6" but I cannot quite understand how it should be wired?
Also, from my understandring, the J1 doubles the internal RCA jacks (?!) and the J7/J9 features a separate set of balanced outputs, right?
Last, but not least, the "Detection" function, mentioned in both J6 and J1, how does it work and how is it wired to the physical connectors?
Kindest regards, RicoTico
Statistics: Posted by ricotico — Thu Aug 22, 2024 7:58 pm