That was a 49" Samsung Ultrawide, 5120 x 1440 2K resolution lol, but in that case I had it on a split so it was taking desktop input + the pi input, each working like a normal 27inch 2K monitor (I also tried multiple monitors). It's a fantastic screen but it's almost too big to be practical sometimes honestly. With nothing attached I see the diagnostic screen (it seems to just load and then poll for USB or SD connections every 30 seconds or so). I thought about the power supply but it's brand new, I bought it just to confirm it wasn't that issue. I've also tested in on 65W chargers and a 140W anker portable battery, and used a multimeter to check the GPIO pins which show 5V and 3V so I assume it's not that. I thought it was maybe a bad image but I've flashed it from multiple computers so I assume even if a cached copy was bad it wouldn't be bad twice
Statistics: Posted by IGot99Piblems — Thu Apr 04, 2024 8:53 pm